Vivitar 3765 - Manual (Page 33)

Installing Software
Step 1: Utility Installation
1. Insert the V3765 CD into your CD-ROM drive. Don't
connect the camera to the PC at this time.
2. The installation program should start automatically.
If not, double click the My Computer icon on your
desktop, open the CD-ROM drive, and then run the
'setup.exe' found on the installation CD-ROM.
3. Follow the on-screen instructions. All the necessary
software is installed automatically. The utility
program that allow the camera to 'talk' to the
computer via the USB cable are also installed.
Step 2: MSD / PC Camera Driver Installation
1. To install the necessary drivers for Mass Storage
Device (MSD) mode (for Windows 98 users) and PC
Camera mode (all Windows users), first set the
correct operational mode for that function. For
example, set the Mode Dial to PC Camera mode to
install those drivers, and to any other mode to install
Mass Storage Device drivers.
2. Connect the small connector of the USB cable to
the camera, as shown:
29