Vivitar 3765 - Manual (Page 25)

Chapter 2 - Capturing Images
This chapter shows you how to capture images with your
3765 camera.
Preparing the Camera
To prepare the camera for capturing images:
Press the Power button to turn the camera on. After a
short pause, the LED will stop flashing, signaling that the
camera is ready to use.
NOTES:
• Make sure you have installed two AA batteries.
• If you want to store your images on an SD/MMC
memory card, make sure it is inserted before you turn
on the camera. If you want to store images to the
camera's internal memory, either remove the
memory card, or select “Internal” from the Memory
Type menu.
• Using the LCD display consumes battery power. To
prolong the life of your batteries it is recommended
that you turn off the LCD display when not in use.