Vivitar ViviCam 3345 - Manual (Page 10)

10
Recording Digital Video
1. Press and hold the button for three to four seconds to power on the camera.
2. Press the button four times to the Movie icon .
3. Press the Select ( ) button to select the desired exposure setting:
Indoor or Outdoor
4. Frame your subject through the viewfinder and press the Shutter button once to start recording. The
video icon will blink continuously while the camera is recording a video. The status LCD will
display the time remaining (in seconds) for the available memory.
5. To stop recording a video, press the Shutter button again. The status LCD will display the maximum
duration of a video-clip that you can capture based upon the available memory.
Note:
•
The Movie mode does not use the flash function.
•
If an external memory card is used, the camera will store video on the card.
Deleting Image and Video Files
This function allows you to delete images and videos stored on your ViviCam 3345, or on a memory card.
Deleting the Last Image
1.
Press and hold the Select button for one second, and the Delete Last icon will appear on
the status LCD.
2. Press the Shutter button once to delete the last file recorded. The camera will beep to confirm that
the last recorded file has been deleted.