Vizio E190VA - Manual (Page 7)

Initial Setup
Please select your input source:
Next Back Select
Antenna
Cable
Tuner
Exit EXIT
6
If the TV is connected to an external antenna, select Antenna, then
press Right Arrow and go to step 7.
If the TV is connected to a cable service without a set-top box
(cable is connected directly from the wall outlet) select
Cable,
then press Right Arrow and go to step 7.
If the TV is connected to a cable or satellite set-top box, press the
EXIT button on the remote, then select the input to which your
set-top box is connected (
HDMI, COMP, or AV).
Initial Setup
Please connect your cable or
antenna to the DTV/TV input
Scan
Skip Scan
Channel Scan
Next Exit EXIT Back Select
7
Press the Up/Down Arrow buttons on the remote to highlight
Scan.
Press Right Arrow to begin the channel scan.
Wait for the channel scan to finish.
When the channel scan is complete, the first-time setup is
complete.