VIEWSONIC VS12464-1G - Manual (Page 9)

ViewSonic VT2430 7
ENGLISH
Rear View of the Product
Item Description
1 Power (AC input) Plug-in the supplied AC Power cord and connect to the AC
input power source.
2 HDMI Input Terminal Connect this port to the HDMI/HDMI-DVI jack of the
compatible equipment.
3 PC signal input Connect a 15-pin D-sub VGA cable to the VGA output of your
computer and the other end to the PC input on the rear of the
LCD TV.
4 YPbPr signal input Connect this jack to the YPbPr output of A/V device.
5 Composite Video input Connect this jack to the composite video output connectors on
your A/V equipment.
6 S-Video input Connect the S-Video cable from the compatible device to this
connector on the rear panel of the LCD TV.
7 TV Input Jack Connect this jack to your Cable or VHF/UHF antenna.
8 AV/ S-Video Audio input
(left/ right)
Connect the Audio in cable for AV/ S-Video from this jack to
the corresponding connectors on your A/V device.
9 YPbPr Audio input
(left/ right)
Connect the Audio in cable for YPbPr from this jack to the
corresponding connectors on your A/V device.
10 Audio output Connect this port to your A/V device with audio in (RCA)
connectors or to audio amplifier.
11 PC Audio input Connect the PC Audio Out on your computer to the PC Audio in
on the rear of the LCD TV. This jack is used for PC Audio input,
when the picture input is connected to VGA on the PC.
12 Headphone Jack Connect to your headphones. By connecting the headphones,
you can listen to the sound from the TV on headphones.
＊If you connect the headphones, the TV speakers will be muted.