VIEWSONIC VS12464-1G - Manual (Page 18)

ViewSonic VT2430 16
ENGLISH
1. Press ► to get into “Manual Search”.
2. Move the cursor to “Channel”, and select the desired channel position with ◄►.
3. Move your cursor to “Search”, and search the detectable channels with ◄►.
4. Move your cursor to “Fine Tuning”, and adjust the picture with ◄►.
5. Move to Store, then store the instruction with 确认 (ENTER).
Note: The channel will be stored instead of the former program.
• Channel Edit: Advance settings of the programs. Press ► to get into “Name”.
1. To enter a name: Press “ 1” (on the remote control) to edit a name for the channel. Use
▲▼ to select the desired letter (0~9 , A~Z and Space ) and use◄► to move the cursor
to enter next letter. After the desired name is entered, press “ 2” to confirm.
2. To Erase/ Add channels: Use ▲▼ to select the desired channel. Press “ 3” to erase the
channel or add it. When using 频道▲/▼ (CH▲/▼) key, the channels you erased will be
passed over. You may press “ 3” to add the erased channels or use Auto Scan function
to re-present them.
3. To exchange one channel with another: Press “ 2” to enter the function of “Sort,” and the
following screen will show.
• Manual Search: The function is to give a minute search for possible existing channels and
store them in memory.
＊ For China area :
＊ For Hong Kong area:
E x i t E x i t
E x i t E x i t