VTech VT9127 - Manual (Page 8)

8
GETTING ST
ARTED
SETTING UP YOUR VT9127
RINGER SELECTION
1. Press PROG/CHAN.
2. Press or until the screen displays RINGER:
and the current setting.
3. Press SELECT. The current selection will flash,
and you will hear a sample of the selected ring.
4. Press or to select a different ring style (there
are 4), or turn the ringer OFF.
5. Press SELECT to confirm your choice.
NOTE: If the ringer is set to OFF, the display will
show “RINGER OFF” in idle mode.
TONE/PULSE SELECTION
NOTE: Your VT9127 is factory-preset for TONE
dialing.
1. To change dialing mode, press PROG/CHAN.
2. Press
or until the screen displays DIAL
MODE: and the current setting.
3. Press SELECT. The current setting is flashing.
4. Press
or to change the setting.
5. Press SELECT to confirm your choice.