Vizio GV42L User Manual

Page 44

VIZIO GV42L HDTV User Manual

Version 8/1/2006

www.VIZIOCE.com

4.3

Advanced Picture Adjust

When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE ADJUST
page. Press the button to highlight the
Advanced Picture Adjust selection and press OK.

A new menu is displayed showing the Advanced
Picture Adjustments available on the GV42L HDTV.

4.3.1

DNR

Digital Noise Reduction is used to reduce the appearance of digitizing errors caused by the compression
process used to encode the program into MPEG-2 for transmission to your home. This is also referred to
as MPEG Noise Reduction. Press the button to
choose from OFF, LOW, MIDDLE or STRONG.

4.3.2

Black Level Extender

Extends the ability of the HDTV to reproduce some
detail that may be lost in the black areas of the
picture. Press the button to turn this feature OFF
or ON.

4.3.3

White Peak Limiter

Extends the ability of the HDTV to reproduce some
detail that may be lost in the white areas of the
picture. Press the button to turn this feature OFF or ON.

4.3.4

Color Transient Intensity

The GV42L automatically adjusts the picture for color errors caused by fast changing scenes and this
selection allows you to set the amount of adjustment applied, to suite your taste. Press the button to
choose from OFF, LOW, MIDDLE or STRONG.

4.3.5

Flesh Tone

If you feel that your GV42L is not reproducing flesh colors correctly, even after adjusting for the correct
amount of color, section 4.2.5 on page 42, you are able to make a fine adjustment using this feature.
Press the button to turn this feature On or OFF.

4.3.6

Adaptive Luma

For some programs there may be perceived some transient changes in the luminance of the picture and
the Adaptive Luma feature may reduce this effect. Press the button to turn this feature On or OFF.

4.3.7

Dynamic Contrast

For some programs there may be perceived some transient changes in the contrast of the picture and the
Dynamic Contrast feature may reduce this effect. Press the button to turn this feature On or OFF.