Vizio RP56 - Manual (Page 43)

VIZIO RP56 User Guide
040330 40
Setting a Password
You control access to the Parental Control features with a password. The default password is 0000.
You can change the password to any four-digit number.
To change the password:
1. Press
the TV component button.
2. Press the MENU button on the Universal Remote
Control and the Main Menu will be displayed on
the screen, as shown opposite.
3. Press the T or S button to select PARENTAL
CONTROLS.
4. Press the OK button and the Main Menu will now
change to the PARENTAL CONTROLS Sub
Menu.
5. Press the OK button again to select ACCESS
CODE.
6. Enter your password. If you have not set a
password, use the number button pad to enter
0000. For more information about setting a
password, see “Setting a password” on page 41.
7. Press the T or S button to select CHANGE
ACCESS CODE.
8. Press the OK button to select CHANGE ACCESS
CODE.
9. Use the number button pad to enter a new four-
digit password.
10. Enter the new password again when prompted.
11. Press
the EXIT button repeatedly to exit the OSD.
To reset your password:
1. Press
the TV component button.
2. Press the MUTE button on the Universal Remote Control.
3. Press the INFO button, then press the ▲, ▼, ◄, ► and OK buttons. A RESET ACCESS CODE
message appears. Your password has been reset to 0000.