VistaQuest VQ1100 User Manual
Page 12
- 9 -
the video resolution; The capture mode return to single mode
automatically when finish recording.]
9. Self-Timer Mode: Press the mode button five times and then
press the shutter button to confirm. Press the mode button
again to select the icon
on
(reactive the Self-Timer mode), and
then press the shutter button to confirm. Press the shutter
button again and camera will take a picture automatically after
10 seconds.
10. 60Hz Mode: Press the mode button six times and then
press the shutter button to confirm. Press the mode button
again to select the icon
60H
.
You should set up to this mode
if you use 60Hz power.
11. 50Hz Mode: Press the mode button six times and then
press the shutter button to confirm. Press the mode button
again to select
the icon
50H
.
You should set up to this mode
if you use 50Hz power.
12. Delete One Picture Mode: Press the mode button seven times
and then press the shutter button to confirm. Press the mode
button again to select the icon , press the shutter button
and the icon will blink, press the shutter button again to
confirm and camera will delete (erase) last stored picture from
the memory.