Vax X3 - Manual (Page 7)

A
S
S
E
M
B
L
Y
6
TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
Using a Phillips or Flat Head screwdriver,
secure the handle by inserting the
provided four screws into the back of
the handle.
4.
Align handle onto base of cleaner.
3.
Pull cleaning wand to the front
of the cleaner and press hose
into handle assembly.
Insert excess cord into handle of
the cleaner by pushing down into
lower handle. CAUTION: AVOID
PINCHING CORD WHILE
INSERTING INTO HANDLE.
Connect the cleaning wand to
the opening on the base and push
the wand handle towards unit
until it snaps into place.
1. 2.
5.
Use carry handle located on dirt
container lid.
1.
TRANSPORTING
YOUR CLEANER
NOTE: Do not
carry vacuum
cleaner by the
cleaning wand
tube.This is not
a carry handle.