Rear panel descriptions and functions cont – VocoPro DA-3800 PRO User Manual
Page 21
19
8. SPEAKER OUTPUT - You can connect two different speakers between SPEAKERS OUTPUT L and R.
Exposed speaker wire can be used by removing the corresponding left or right knob from the speaker
terminal by turning counter-clockwise, inserting the wire and re-insterting the knob and securing it by
tightening clockwise. “Banana plug” style speaker cables can also be used for left and right of each
pair. Refer to the “Getting Connected” portion of this manual for further information on connecting your
speakers and the use of “banana plug” connections.
9. VOLTAGE SELECTOR - Using this switch you can select between 115V and 230V power settings.
NOTE: The power supply cord should be disconnected before changing the voltage selector.
10. FUSE - This plastic cover is the housing for the DA-3800 PRO’s fuse. Use only FUSE type F3.15AL,
250V when replacing the fuse.
11. AC INPUT - Connect the power cable here.
Rear Panel
Descriptions and Functions cont.
������������������
������������
���������������
���������������������������
WARNING: TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE
CAUTION: TO
REDUCE THE
RISK OF FIRE,
REPLACE
ONLY WITH
SAME TYPE
FUSE
���������������������
������������������������
�����������������������
����������
����
��������
����������
�������
�������
�����
CAUTION: TO PREVENT ELECTRIC
SHOCK, DO NOT REMOVE COVER
SCREWS. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
����������
��������
THE POWER
SUPPLY CORD
SHOULD BE
DISCONNECTED
BEFORE
CHANGING THE
VOLTAGE
SELECTOR
110V
220V
���
���
�����
���
��
���
���� ���
��������������
������������������
��������������
�
�
��
��