System maintenance – Viper 5002 User Manual

Page 10

of trouble-free operation. Due to the complexity of this system,
it must be installed by an authorized dealer only. Installation of
this product by anyone other than an authorized dealer voids the
warranty. All dealers are provided with preprinted dealer certifi-
cates to verify that they are authorized.

This owner’s guide should help you to get the most out of your
system. Please take the time to read it prior to using the system.

system maintenance

This system needs no specific maintenance beyond remote

control battery replacement. The 2-way remote is powered by a

1.5V AAA battery. The 1-way remote is powered by a pair of 3V,

CR2016 batteries.

Baatttteerryy L

Leevveell IIn

diiccaattoorr ((2

2--w

waayy rreem

moottee))

The Battery Level indicator has four level indicators that serve as

a visual indication of battery charge. When the battery reaches a

low charge level that requires replacement, the remote control

will generate a single notification chirp, and the Battery Level

indicator will flash continuously.

Battery Replacement (2-way remote)

Gently pull the end of the battery door away from the top of the

remote control then slide the door up to expose the battery and

remove the expired battery. Place the new battery into the remote

EMPTY

REPLACE

FULL

➜