Vinotemp VT-32BCSB - Manual (Page 7)

7 1 7 6 3 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
S N 3 2 B C H D 1 7 V T - S 1
OPERATING INSTRUCTIONS
1. Gently place/slide the racks into the beverage cooler.
2. Determine the best temperature setting to use.
3. Place bottles/cans inside the cooler.
4. Plug the power cord into a standard grounded electrical outlet.
5. Limit the frequency of opening the door to conserve energy and
maintain proper storage temperature.
6. You can turn the interior light on and off by touching the button
labeled with a light on the control panel.
Important: When using the beverage cooler for the first time, allow at
least 24 hours for the internal temperature to adjust properly. Make sure
there are at least
3 to 5 bottles in the unit.
TEMPERATURE CONTROL
Important: In order to operate efficiently, this product should be
in an environment with an ambient temperature of less than 90°F
(32°C).
Temperature preset:
For your convenience, the beverage cooler is programmed at storing
temperature. The temperature pre-set by the manufacturer is 48°F (9°C).
Setting the temperature:
You can manually adjust the temperature. Simply press the
“ ” button
on the control panel to decrease the temperature and the
“ ” button to
increase the temperature by 1 degree increments inside the beverage
cooler. The temperature range for this unit is from 40°F (4°C) to 65°F
(18°C).
When the cabinet temperature is too low, the LED will display “LL”. When
the temperature is too high, it will display “HH”. The “ER” display shows
when there has been a power disruption.