Vivitar ViviCam T026 - Manual (Page 56)

55
TV Out Function to Connect the Camera to a TV
The camera has an AV port to use your larger TV screen in place of the camera`s LCD screen. On
plugging the TV-out cable (supplied) to the cameras AV out jack, the LCD screen will turns blank. Use the
camera as you would to capture and playback photos and videos. The images will appear on the TV
instead of on the LCD screen.
Note: The only limitation of using the TV screen is that the camera is now not portable.
1) Connect the camera to a TV via the TV-out cable (supplied).
2) Turn on the TV and the camera, and then s
et the TV to “AV” mode.
3) When the camera is set to record mode, you can preview the subjects you want to record on the
TV screen.
4) When the camera is set to Playback mode, you can review on the TV all the photos and videos
stored in the camera or on the SD memory card.
Installing the Software
You must be connected to the internet to install and run the Vivitar Experience Image Manager
software.