VTech VT 1511 - Manual (Page 19)

19
BASE UNIT FEATURES
The Base unit of the VT 1511 is a
normally functioning telephone. To
make or receive calls from the base
unit, simply lift the corded handset and
answer or dial normally.
DIALING Keys
Use these keys to:
•
Dial numbers
• To program memory
• To program ring styles for base and
headset
INTERCOM Key
• Lift the corded handset on the base
unit and press this key to place (or
answer) an intercom call.
PROGRAM Key
• Use this key to program Speed Dial
Memory or Ringer Tones. See
Speed Dial Memory and
Programming Ringer Tones.
HOLD Key
• Press this key to place an active
call (on the corded handset) on
HOLD.
• Press again to release the HOLD
and return to normal conversation.
REDIAL Key
Press this key to redial the last number
dialed from the base unit.
MEMORY Key
Use this key to program and dial Speed
dial Memory numbers. See Speed Dial
Memory.
QUICK MEM Key
Press this key to automatically dial the
Speed Dial number stored in location
00.