VTech VT 1511 - Manual (Page 12)

12
GETTING STARTED
Setting up Your VT 1511
Choose an area near an electrical
outlet and a telephone wall jack.
AC Power Adapter
Plug the AC power adapter into an
electrical outlet and the DC connector
to the back of the base unit.
To AC socket
outlet
To telephone
line lead
To telephone
socket outlet
AC adaptor
CAUTION
Use only CLASS 2 9V DC POWER
SUPPLY included with your phone.
Plug the power cord of the Remote
Charging Stand into an electrical outlet.
Charge the Battery
Charge the headset battery pack
before use. The battery pack recharges
automatically whenever the headset is
on the remote charging stand. The
batteries must be charged for 16 hours
before using your phone for the first
time.
Headset and Base Ringer
The headset and base ringer are
programmed ON as the factory default.
Refer to PROGRAMMING THE
RINGER for more information.
Tone / Pulse Selection
To select the desired dialing mode, set
the switch on the underside of the base
unit to TONE or PULSE.