Vivitar VIVICAM 8025 - Manual (Page 8)

loses power and turns off or when the battery door is opened to replace the battery.
Charge lithium battery
Please charge the battery as below 2 methods:
A. Charge with USB cable
Insert the lithium battery into your camera correctly, and connect your camera to computer with USB cable.
The red LED of camera will be light on indicating that your camera is in charging status, the LED will
be off when charge full.
B. Charge with supplied charger
Your camera is supplied a compatible charger for you, you are only required to put the battery into charger
and charge the lithium battery directly from electrical outlet
Installing SD Memory Card
Your camera has a memory card slot that enables you to insert any “SD” compatible memory card up to 8BG.
Adding a memory card will allow you to increase the capacity of your camera before you have to transfer
photos and videos to your PC. Install the SD memory card as below:
1. Locate the Memory Card slot within the battery compartment.
2. Insert the Memory card into the slot in the correct direction. (see the sketch below)
7