Vivitar VIVICAM 8025 User Manual

Page 14

For close up shooting slide the switch to the

position. The icon

appears on the LCD screen and

indicates that the macro shooting mode is on.

For far shooting slide the Macro/Far switch to the

position. The icon

appears on the LCD screen, to

indicate that the far shooting mode is on.

Flash

In low light conditions it is best to use the built-in flash. You can also use the flash to compensate for backlight

conditions.

To set the flash:

Touch the icon

function area until the

icon appears on the left side of the LCD screen. This

will activate the automatic flash.

Touch the icon

function area again until the

icon appears on the LCD screen. This means

the flash function has been "forced on" (manual flash).

Note: If the flash is not ready, a LED will light up and the

icon will flash repeatedly - wait until the

flash is ready before taking a photo.

Touch the icon

function area again until the

icon appears on the left side of the LCD

screen. This will activate the red-eye reduction feature.