Vivitar ViviCam 3340 - Manual (Page 16)

4.4 Functions and Modes
Your camera has two functions and two modes.
Functions include: 1) Taking images, 2) Deleting images.
Modes include: 1) Movie Mode, 2) Setup Mode.
Modes & functions are described in the following paragraphs.
The Photo (FOTO) Function – Taking Images
1. Press the Mode button and “FOTO” will appear on the
Status LCD. Then, press the Shutter button to enter the
FOTO submenus.
2. Scroll through the FOTO submenus by pressing the
Select button. There are three FOTO submenus: FLASH
(STRB), WHITE BALANCE (W-B) and RESOLUTION (RES).
Press the Shutter button to enter a submenu.
3. FLASH (STRB) submenu. Use the Select button to
ENABLE or DISABLE the flash. Press the Shutter
button to confirm your selection.
4. WHITE BALANCE (W-B) submenu. Use the Select
button to select the desired white balance setting:
Auto Tungsten Cloudy Sunny Fluorescent
Press the Shutter button to make a selection.