Uniden MH120 - Manual (Page 18)

Deleting a Channel from Memory
Select the channel to delete from
memory by pressing the
▲ or ▼ button.
Press the MEM button.
MEM disappears from the display.
Scanning
To begin scanning the programmed
channels, press the
SCAN button. SCAN
and TRIPLE appear on the display.
To stop scanning, press the SCAN
button once more. SCAN and TRIPLE
disappear from the display.
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel until
the transmission ends, then resumes scanning after a 2 second
delay period.
• When in the scan mode, the unit automatically activates the
Triple Watch feature. To deactivate Triple Watch from the
scanning mode, press and hold the
16/9/TRI button for
2 seconds. TRIPLE disappears from the display.
2
1
2
1
16
UT899BH (MH120)_ENG 3/15/05 4:24 PM Page 16