Unitech PA962 - Manual (Page 39)

39
Product Reference Guide
To avoid conflict with your LAN environment, please consult with your MIS depart-
ment for the correct TCP/IP setting.
If there is no DHCP server in your LAN environment, specify the individual IP
address on each PA962 with the following steps:
Specifying an IP Address
Obtaining an IP Address via DHCP Server
Please check with your MIS department to determine whether a DHCP server is
available in your LAN environment. If available, tap the radio button Obtain an IP
address via DHCP
, and then tap the OK button.
Tap the Name Servers tab,
and then input the proper
Primary DNS, Secondary
DNS, Primary WINS,
and
Secondary WINS.
=
Input the proper IP address,
Subnet Mask,
and Default
Gateway.
=
Tap the radio button Specify
IP Address. =
Note
: To change the above settings, please perform the following steps:
Select the proper RF
card driver and then
tap the Properties
button.
=
Double tap the Net-
work icon
.
=
Tap Start, Control
Panel.
=
וֹ כּ מּף ףץ٪ّ ٠מּَ ِ ٩٭۶ףוֹ ٭٩ץף ێ ۖ ףףףףףףףףףףף wwwِpdffactoryِcom