Uniden XS915 - Manual (Page 8)

Direct wall mounting
!
!
!
!
!
You can mount your phone directly to the wall. Before doing this, consider the following:
Avoid electrical cables, pipes or other items behind the mounting location that could cause a hazard
when inserting screws into the wall.
Mount your phone within distance of a working phone jack.
Make sure the wall material is capable of supporting the weight of the base and handset.
Use screws with anchoring devices suitable for the wall material where the base unit will be placed.
MOUNTING THE BASE UNIT ON A WALL
Page 4
GET
TING
ST
AR
TED
1. Insert two mounting screw into a wall (with their
appropriate anchoring device), 10cm apart. Allow about
3mm between the wall and screw heads for mounting
the phone.
2. Plug the AC adaptor into the Base Unit and then into a
power point.
3. Plug the telephone cord into the Base Unit and then into
the telephone socket on the wall.
4. Align the mounting slots on the base with the mounting
posts on the wall. Then push in and down until the
phone is firmly seated.
TOP
3mm
10cm
35mm