Uniden XS915 - Manual (Page 3)

!
!
Pick up the handset and press
Dial the phone number
OR
Dial the phone number
then press
To hang up - press
OR
Place the handset on the Base Unit.
!
!
!
Handset on Base Unit:
Remove the handset from the base
and speak (Auto Talk).
Handset off the Base Unit:
Pick up the handset, press
and speak.
To hang up - press
OR
Place the handset on the base unit.
Installing the Base Unit
• Plug the telephone cord into the Base Unit,
then into the telephone socket on the wall.
• Plug the AC Adaptor cord into the Base Unit,
then the AC Adaptor into the wall power
point.
• Press the AC Adaptor cord into the curved
recess under the Base Unit.
Installing the Handset Battery
Making a Call Answering a Call
New Zealand
Australia
Tel Line Adaptor (Not supplied)
Power Point
Main Base
!
!
Press the battery cover and slide it off
Connect the battery plug to the socket at the rear of the battery compartment.
The RED and BLACK battery wires must match the RED and BLACK printed on
the phone case for the plug to fit properly. Press firmly until it clicks into place.
Make sure that the plug is the right way round.
Page ii