Unitech PT-500 - Manual (Page 20)

19
Select [1] to change the time
Enter the correct time (HH:MM:SS).
Press [Enter] to save and exit to previous menu.
Press [EXIT] to abort and exit to previous menu.
Select [2] to change the date
Enter the correct date (MM/DD/YYYY).
Press [Enter] to save and exit to previous menu.
Press [EXIT] to abort and exit to previous menu.
2. CODE MENU
Select [2-CODE] to enable/disable the barcode
symbologies decoding.
Press [SP] to change the selection.
For each symbology item, press [Enter] to confirm the
setting and continue to the next setting.
Press [EXIT] to abort the last change and exit to the
previous menu.
< TIME MENU >
TIME 00:00:00
XX:XX:XX
< DATE MENU >
DATE 00/00/2001
XX/XX/XXXX
< CODE MENU >
UPC/EAN ON