Uniden DS845 - Manual (Page 28)

Remote access away from home:
You can operate your answering system from a remote location using any touch-tone
telephone. Use this function to check for recorded messages, play or delete messages, record
a new outgoing message - or - monitor sounds in the room.
1. Call your telephone number.
2. While the greeting message is played, press and your PIN code within 2 seconds.
If the answering system is off, let it ring 10 times. When the greeting plays, press
and your PIN code within 2 seconds.
3. The answering system announces the number of messages stored in memory. Then the
message playback automatically begins.
4. You may continue to listen to your message, or you may select a command from the
following chart.
5. After all of your messages have played, or the playback time exceeds 4 minutes, you will
hear intermittent beeps indicating that the system is in the command waiting mode. You
may enter another command at this time from the chart above.
6. When you finish, hang up to exit the system. The answering system automatically returns
to standby.
Remote room monitor:
You can call your answering system from any touch-tone phone and monitor sound in the
room where your base is installed.
1. Call your telephone number.
2. While the greeting message is played, press and your PIN code. If the Answering
System is off, let it ring 10 times. The tone sounds. Press and your PIN code.
3. The answering system announces the number of messages stored in memory. Then the
message playback automatically begins.
4. Press then to stop the messages.
5. Press then . You hear sounds in the room where your phone is installed.
After 15 seconds, the answering system returns to the Command Waiting mode.
6. Press then to monitor the room for another 15 seconds. Or select another
remote function. Or hang up to exit the system. The answering system automatically
returns to standby.
#
#
#
#
#
22
#
#
5
Command Function
then 1 Repeat a message # Press
Play the messages # then 2 Press
Skip a message # then 3 Press
Delete a message # then 4 Press
Stop message playback # then 5 Press
Answering system ON # then 6 Press
Voice memo record / stop
( up to 4 minutes recording time )
# then 7 Press
Greeting message record / stop
Answer system OFF then 9
# Press
Room monitor then # Press
then 8 Press #