Uniden UH088SX CB - Manual (Page 15)

Operation
UNIDEN UHF CB Transceiver
13
Choosing a Priority Channel
Drop-out delay
The starting channel, when Group Scanning is initiated, is always the priority channel.
Changing the PRI channel setting while scanning
eg: PRI Channel is CH17 (476.825 Mhz)
a press , to select a higher channel (scanning pauses)
- or -
b. press , to select a lower channel
While scanning, the uh088sx stops at a busy channel and receives a transmission. When the received signal is over,
the unit will wait for three seconds for the return of the signal, otherwise, the radio resumes scanning.