Unitech PA600 - Manual (Page 50)

42
Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Performing a Cold Boot
A cold boot will erase all data and all programs you have added and will restore the
device to the default factory settings. However, data and application programs stored
at the Flash Storage/Flash Disk will be not be deleted. Never perform a cold boot
unless a warm boot does not correct your problem. When you perform your next
ActiveSync operation, you can restore any data that you previously synchronized to
your computer or you can restore data that you backed up to a storage card.
1. Tap Start
→ Programs → Utilities →
Boot Mode:
The Boot Mode screen appears.
2. Tap Cold Boot. The system is reset and
you will lose all data including all files in
the RAM memory.
NOTE:
When you perform a hard reset, the date and time settings will not be
retained. Formats, preferences, and other settings are restored to their
default factory settings.