Uniden CB RADIO UH012 - Manual (Page 5)

UNIDEN Model UH-012 CB Radio
TX SCAN DUP
A S C Technology
Advanced Signal Clarity
UH012
4
Think of the squelch control as a
gate. If you turn the squelch fully
clockwise it raises the ‘Squelch
Gate’ so high that no signals get
through.
Turn the unit ON by rotating the volume
control clockwise. Turn the outer ring
of the control to adjust the Squelch.
Setting the FM Squelch
To set the ‘Squelch Gate’ to the
desired level, turn the squelch knob
counterclockwise until you hear
noise. Then carefully turn the
Squelch knob clockwise until the
noise fades. Now only strong
signals get through.
If you turn Squelch fully
counterclockwise it lowers the
‘Squelch Gate’ to the extent that all
signals get through – weak, medium
and strong signals and noise.
Operation
You must select a
channel which is not in
use before setting the
SQUELCH control.
(see p.7)