beautypg.com

Uniden UBC 245XLT User Manual

Page 81

background image

If you experience difficulty while in TrunkTracker™ mode,

try the following steps.

Problem

Suggestion

Scanner won’t track the trunked

system.

1. May not be a system which can be tracked by

your scanner.

2. Missing the data frequency.
3. Change to a Type 1 Scanner setup.

Review Fleet Map Programming on page 56.

Scanner won’t stop during Scan

List mode.

1. No IDs have been programmed.
2. The IDs you have stored are not active.

Scanner will not acquire data

channel.

1. Adjust the squelch for trunking mode.

See page 39.

2. Missing the frequency used for the data

channel. Check your frequency list.

Missing replies to conversations. 1. Change to a Type 1 Scanner setup.

Review Fleet Map Programming on page 56.

2. Try another Preset Fleet Map or Program

your own Fleet Map.

3. Check to see that all of the systems

frequencies have been entered.

Channel Activity Indicators are

flashing but no sound is heard.

1. May be a private or telephone

interconnect call, which are intentionally

blocked by your scanner.

2. The ID in your display is not active.

Scanner not tracking an EDACS

system properly.

1. Logical channel numbers ( frequencies)

for the system are not programmed in the correct

order. Check frequency resources and reprogram.

2. Not all frequencies for the system are

programmed. Check frequency resources.

If you still cannot get satisfactory results while using your

scanner or if you want additional information, please call or

write to Uniden Australia PTY Limited.The address

and phone number are listed in the Warranty at the end of

this manual.

If you have internet access, you can visit

www.uniden.com.au

or

www.trunktracker.com

or

www.bearcat1.com/free.htm for additional information.

77