Uniden UBC 245XLT - Manual (Page 37)

6. Press to scan the
MRN band.
When an active
channel is displayed,
the scanner will
alternate between the
frequency and the
Marine channel number.
7. Press to scan the
UHF CB band.
When an active
channel is displayed,
the scanner will
alternate between the
frequency and the
UHF CB channel number.
8. To exit SVC Scan
mode, press .
During search of one of the preprogrammed service bands,
press
to stop the scan on a frequency. HOLD
appears in the display. Press or to move up
or down one programmed frequency, or press to
resume scanning.
Note: If you want to remain on a channel until a
responding transmission is received, press to
activate the two second delay feature.
1 2 3 4 5 6 7 8
UHF CB
9 10
1 2 3 4 5 6 7 8 9 10
33