Testing the connection, Testing.the.connection – Uniden DECT1560 Series User Manual

Page 11

Installing the Phone

Testing the Connection

Pick.up.the.handset.from.the.cradle.and.press.TALK/FLASH..You.should.hear.a.dial.tone,.and.the.display.

should.show.Talk.

What.if.I.can’t.hear.a.dial.tone?

Check.the.telephone.cord.connection.on.the.base.

What.if.the.display.doesn’t.show.Talk?.

Check.the.battery.pack.connection.in.the.handset.

Make.sure.the.battery.pack.is.fully.charged..

Make.sure.the.AC.adapter.cord.is.securely.connected.to.the..

DC IN 6V.jack..(DC IN 9V.jack.on.the.charging.cradle).and.a.

standard.power.outlet.

Try.resetting.the.handset.(see.page.51).

Make.a.quick.test.call,.and.then.press.END.to.hang.up..

What.if.there.is.a.lot.of.static?.
Check.the.sources.of.interference.described.in.Choosing.the.

Best.Location.(see.page.6):.is.the.base.near.any.of.those?

What.if.the.call.doesn’t.go.through?

Try.changing.the.dialing.mode.(see.the.next.section).

Note:. Make.sure.you.can.get.a.dial.tone.on.any.accessory.handsets.that.were.packaged.with.your.phone..

•

This manual is related to the following products: