Uniden DCX730 Series - Manual (Page 4)

3
Charging the Accessory Handset
The handset is powered by a rechargeable battery pack that
automatically recharges when the handset is placed in the
charger.
1. Connect the AC
adapter to the DC IN
9V jack and to a
120V AC outlet that
is not controlled by a
wall switch.
Caution: Use only
the Uniden AD-0005
adapter.
2. Set the charger on a
desk or tabletop, and
place the handset in
the charger with the keypad facing forward.
3. Make sure that the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and
the handset makes good contact with the charging contacts on
the charging cradle.
4. Charge the handset battery pack for at least 15-20 hours before
using your new handset for the first time.
Registering the Handset
You must register the handset to the base before you can use it.
Only one handset can be registered at a time. (If an accessory
handset has ever been registered to a base, you must reset the
handset before you can register it to a new base.)
Note: The model number for your telephone base is located
on the bottom of main base unit.