Uniden DCX730 Series - Manual (Page 3)

2
Compatible Bases
This handset is compatible with Uniden's 2.4 GHz Digital
Expandable phone system: the DCT736/DCT738 series, the
DCT746/DCT748 series, the DCT756/DCT758 series, the
DMX776/778 series, and the DCT646/DCT648 series. Visit
www.uniden.com for the most up-to-date list of compatible
bases.
Installing the Accessory Handset
Checking the Package Contents
Make sure your package contains the following items. If any
items are missing or damaged, contact our Customer Service
Hotline. See back cover page for contact information.
Installing the Battery
Follow the steps below to install the
rechargeable battery pack.
1. Using the finger indentation, press in
on the battery case cover and slide it
down to remove it.
2. Plug the battery connector into the
battery compartment jack. Be sure to
match the red and black wires to the
label near the jack.
3. Gently pull on the battery wires. If the
battery connector comes loose, try
connecting it again.
4. Replace the battery case cover and
slide it up until it clicks into place.
Note: Use only the Uniden BT-1004
rechargeable battery pack supplied
with your cordless telephone.
• Cordless Handset
• Charging Cradle
• AC Adapter, model # AD-0005
Input: 120V AC 60 Hz
Output: 9V DC 210 mA
• Rechargeable NiMH Battery
Pack, model # BT-1004
Capacity: 500 mAh, 3.6V
• Beltclip
• Printed Material