Uniden Atlantis 260 - Manual (Page 17)

Deleting a Channel from Memory
1 Select the channel to delete from
memory by pressing the s or t button.
2 Press and hold the MEM button for 2
seconds.
MEM disappears from the display.
Scanning
1 To begin scanning the programmed
channels, press the SCAN button. SCAN
and TRIPLE appear on the display.
2 To stop scanning, press the SCAN
button once more. SCAN and TRIPLE
disappear from the display.
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel until
the transmission ends, then resumes scanning after a 2 second
delay period.
• When in the scan mode, the unit automatically activates the
Triple Watch feature. To deactivate Triple Watch from the
scanning mode, press TRI button. TRIPLE disappears from the
display.
15
Atlantis 260CE.indd 15 6/3/08 4:51:13 PM