Ultratec Miniprint 425 - Manual (Page 17)

Signal light and display
The signal light and display show what is happening on the
telephone line in the following ways:
• Signal light steadily on: dial tone.
• Signal light flashing slowly or RINGING on display:
telephone ringing.
• Signal light flashing quickly or BUSY on display: telephone
busy.
• Signal light flickering: person picking up telephone or
speaking.
Dialing tips
You may need to type a 9 or other number to reach an
outside line if you are using the Miniprint 425 in an office.
Use a comma to put in a two-second pause.
For long distance, include a 1 and the area code.
Use a ! for a hook flash.A hook flash is used in a voice mail
system or to transfer a call.
You cannot use * and # with pulse dialing.
Using a telephone to dial
If you have a telephone connected with your Miniprint 425,
you can dial the number on the telephone. Follow these steps
to use a telephone to dial a number:
1. Pick up the handset and dial the number on the
telephone.
2. Turn on the Miniprint 425.
3. Press any key to go on-line.
4. Hang up the telephone handset.
5. Wait for a response.
C A L L I N G • 1 5