Uniden DECT1080 User Manual
Page 30
Base PIN code
You need to enter the base PIN code when you
are registering handsets. For security reasons you
may wish to change the PIN code. You can
choose a PIN code up to 4 digits long.
If you reset the base from the handset, base PIN
code will be 0000.
Always keep a record of your base PIN code.
Note your PIN code and keep it in a safe place.
If you change the PIN code you will need to use
the new code for any handset registered to your
base.
1 Press
to access the main menu.
2 Press
or
until
Base Settings
is
displayed and press
.
3 Press
or
to display
Base Pin
and
press
.
4 Enter a new PIN code (up to 4 digits) and
press
.
5 Press
to exit and return to standby.
Selecting a base
You can register a handset to up to 4 bases, e.g.
one at work and one at home or one upstairs and
one in the garage, and switch between them.
Once your handset is registered with other bases,
you can either specify the base you want to use
or, select
Automatic
for your handset to choose
the base with the strongest signal.
1 Press
to access the main menu.
2 Press
or
to select
Add.Settings
.
Press
.
3 Press
or
to select
Select Base
.
Press
.
4 Press
or
to select
Automatic
or
the base number. Press
.
[29]
UC01501BB_0 8/9/06 2:49 PM Page 29