Placing a telephone call, Redial, Receiving a telephone call – Uniden FP101 User Manual

Page 18: Using your fp101

USING

YOUR FP101

USING YOUR FP101

PLACING A TELEPHONE CALL
1. Remove the Handset from the Base.
2. Press the keypad buttons to dial the phone number you want.
3. After you have completed the phone call, place the Handset back on the Base.

REDIAL
If you want to redial the last number dialed, simply pick up the Handset
then press the

button. The telephone will automatically redial the last

number dialed.

RECEIVING A TELEPHONE CALL
When the phone rings, pickup the Handset from the Base and begin the
conversation.

ACCESSING THE CALL WAITING SERVICE USING THE
CALL WAITING BUTTON (New Zealand Model only)
While talking you hear the Call Waiting beep signal.
Press the

button. This feature sends a 600mS timed “hook-flash”

on the telephone line for accessing services such as Call Waiting, etc.

ACCESSING THE CALL WAITING SERVICE USING THE
CALL WAITING BUTTON (Australian Model only)
1. While talking, you hear the call waiting signal (series of beep tones).

2. Press the

button then

to switch call and put the current

call on hold.

3. To switch back to original call, press the

button then

NOTE: You must subscribe to Telecoms Call Waiting Service before you can use this feature.

NOTE: The

call waiting procedure toggles call between the

incoming and the original call (vice versa). The

procedure will drop the current call connection and pick up the incoming call or
the call on hold.

FP101-OM.qxd 7/12/98 09:12 Page 18