Uniden FP101 - Manual (Page 16)

DIALING STORED NUMBERS
For example, to dial memory 3 from the telephone
1. Pick up the Handset.
2. Press the
button. The telephone will dial
the number stored in this memory location.
3. After you have completed the Phone call, place the Handset back on the Base.
CHAIN DIALING
On certain occasions, after dialing a number, you may be requested by the party
or service you are calling to enter a special access code, such as when
performing a banking transaction. Simply store this number in another memory
location, refer to “Storing Memory Dial Numbers” on Page 15.
In this way you can recall both numbers that are stored into their own memory
locations at the relevant times.
USING
YOUR
FP101
USING YOUR FP101
PAUSE
During the memory storage procedure you may enter a 4 second delay between
numbers (for accessing a switchboard, or long distance service) by pressing the
button on the Handset at the point in the number sequence you wish to
pause. The button counts as one digit. Pressing more than
once will increase the length of the pause between numbers.
16
NOTE: If you select a memory location that does not have a stored number, the telephone
will not dial.
FP101-OM.qxd 7/12/98 09:12 Page 16