Console terminal settings – Univex ProSafe WFS709TP User Manual
Page 32
WFS709TP ProSafe Smart Wireless Switch Hardware Installation Guide
A-4
Cables and Connector Pinouts
v1.0, May 2007
To connect the required RS-232 serial cable to a terminal with a DB-9 male port, use the included
adapter. Pinouts are shown in
:
Console Terminal Settings
contains the settings for a console terminal connected to the serial port.
Figure A-3
Table A-2. Console Terminal Settings
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
9600
8
None
1
None