Uniden FP103 - Manual (Page 10)

50 Memory Caller ID
When you use this telephone with the Caller ID service,
you will see the number of the calling party (unless
the call is blocked or is from a silent number) before
you answer the phone. This telephone will store and
display information about the last 50 calls received.
Each call, together with the time and date, is numbered
in the call history. When the memory is full, the oldest
call information is deleted to make room for new
incoming call information.
USING CALLER ID
If the new call does not stop
flashing after all new calls
have been reviewed, the
memory may have been
corrupted due to a power
surge. Press the reset button
to manually clear all the
memory.
For caller ID features to
operate, you must first
subscribe to the service from
your local telephone
company.
9
Caller ID Summary
The screen will display the caller ID summary
TOTAL CALLS XX
(where XX is the total
number of calls stored in the memory).
The display may also show the number of new calls received (New calls means calls that
have not been reviewed yet).
New Call Review
To review only new call information:
1. Press the mode button - the screen will display
REVIEW NEW CALL .
2. Use the up or down buttons to view the new calls. If no calls have been received the
screen displays
NO NEW CALL
. When all new calls have been reviewed, the new
call light will stop flashing.
Call Review
To review all the calls in the call history, use the up or down buttons.
When the screen displays
END OF LIST or TOP OF LIST , after all calls have been reviewed.
Call Back Dialling
There are two different ways to call back:
1. Pick up handset, locate the number you want to call back by using the up or down
buttons then press the callback button.
-or-
2. Locate the number you want to call back by using up or down buttons then pick
up the handset and press the callback button.
[ ] [ ]
[ ]
[ ]
[ ]
delete
down
up
callback
new call 12:15 AM 20/06
05
0 2 - 9 5 9 9 - 3 6 7 5
CALL
NEW
New Call Light
When a new call is received, the time, date and calling number will be displayed between
the first and second ring.
The new call light will flash quickly when the phone is ringing, and then change to a
slow flash. It will continue to flash until all new call information in the call history has
been reviewed.