Uniden MHS450 - Manual (Page 10)

6 Uniden MHS450 Radio Owner’s Manual
Parts of the charger
CHARGE LED
Lights while the battery is charging and turns off when
the battery is fully charged. (If a fully charged battery
is placed in the cradle, the LED does not light.)
Power input jack
(DC 12V-13.8V)
Use ONLY the AC or DC adapter that came with your
radio! The DC adapter must connect to a 12-13.8V
power supply with a negative ground.
Reading the display
The LCD screen displays different information depending on
the current status of the radio:
Power input jack
( DC 12V-13.8V )
charge
LED
charging
latch
Screw holes
for wall
mounting
Screw holes
for flat surface
mounting
Power input jack
( DC 12V-13.8V )
charge
LED
charging
latch
Screw holes
for wall
mounting
Screw holes
for flat surface
mounting
Memory
Alert
Transmit power
level (1 Watt, 2.5
Watts, 5 Watts)
Current channel
is stored in
memory
Status messages
(see status
message table)
Current channel
number
Channel mode
(USA, CANada,
INTernational)
Weather Alert
Watch on
Current band
Battery level icon
Memory
Alert
Transmit power
level (1 Watt, 2.5
Watts, 5 Watts)
Current channel
is stored in
memory
Status messages
(see status
message table)
Current channel
number
Channel mode
(USA, CANada,
INTernational)
Weather Alert
Watch on
Current band
Battery level icon