Univex PRV-LX1 - Manual (Page 46)

46
PRV-LX1
En
Playing Discs
PLAY
PAUSE DISPLAY REPEAT
AUDIO SCAN
STEP RPT A-B
ANGLE SUBTITLE PREV NEXT
SETUP
ENTER
RETURN
SEARCH CLEAR
1 2 3
4 5 6
7 8 9
0 10 >
TITLE/CHP
FRM/TIME
MENU
TOP
MENU
FRM/TIME
STOP
When a DVD disc has been set for fast play, follow
the instructions to begin playback automatically upon
insertion of the disc. When “DVD1” or “DVD1&2”
is designated, “DVD1” is used. To playback discs on
drive 2, “DVD2” must be designated as the playback
source. During playback, controls on the front panel
and remote control unit act to navigate the DVD in
accordance with the disc’s commands.
The
button performs the same function as the
remote control unit’s RETURN button.
Clip Playback (HDD)
When the “HDD” is designated as the playback
source, the PLAY button on the front panel or
remote control unit is used to playback designated
project clips in the order in which they were
recorded. Press the STOP button on the front panel
or remote control unit to end playback.
Basic Operations
7 Operations on the Menu Screen
Some DVD-Video discs are equipped with menu
(selection screen) functions. To select desired titles
from the menu, use the PRV-LX1’s CURSOR button
to select, and the ENTER button to confirm the
selection.
7 To return to the menu screen during playback
Press the
TOP
MENU button.
Also, if the
MENU
button is pressed, the menu screen
within the current title will appear.
7 To advance to the next chapter/title
Press the main unit’s SCAN/SKIP FWD button, or
the remote control unit’s
NEXT
button; the playback will
advance immediately to the beginning of the next
chapter or title.
7 To go back to previous chapter/title
Press the main unit’s SCAN/SKIP REV button, or
the remote control unit’s
PREV
button once to return to
the beginning of the currently playing chapter; press
additional times to return to the beginning of previous
chapters. When multiple titles exist on the disc and
this command is executed within the first chapter of
title, playback will return to the top chapter of the title
immediately preceding the current one.
7 Fast Forward
Hold the main unit’s SCAN/SKIP FWD button or
the remote control unit’s
SCAN
button depressed.
Release the button when you find the desired
location.
While the button is depressed, the scan speed will
increase at set intervals, reaching 192x normal
speed. If the remote control unit’s
SCAN
button is
pressed and released, fast forward will continue. The
scan speed will change depending on the number of
times the button is pressed. Speed can be changed
up to 96x normal, after which time the speed drops
to 6x. When you find the desired location, press the
PLAY
button.
7 Fast Reverse
Hold the main unit’s SCAN/SKIP REV button or
the remote control unit’s
SCAN
button depressed.
Release the button when you find the desired
location.
While the button is depressed, the reverse scan
speed will increase at set intervals, reaching 192x
normal speed. If the remote control unit’s
SCAN
button
is pressed and released, fast reverse will continue.
The scan speed will change depending on the
number of times the button is pressed. Speed can
be changed up to 96x normal, after which time the
speed drops to 6x. When you find the desired
location, press the
PLAY
button.
Note:
Depending on the disc used, the actual scan speed
may be different from the displayed speed. The
speed may be slower particularly when using angle
playback.