Univex PRV-LX1 - Manual (Page 36)

36
PRV-LX1
En
Other Recording Settings
Function Menu’s SET UP section
= [Recording]:
This command also allows the following settings:
Video Encode Rate: 32 levels
Video Filter (NR): 16 levels
Audio Encode: Dolby Digital / LPCM (Note1)
Audio Level: –48 dB to +14 dB
Aspect: 4:3 / 16:9
Setup Level: 0 IRE / 7.5 IRE (Note2)
Auto Chapter: Manual / Automatic
(at 3/5/10/15/30/60
minutes intervals)
REC Button: REC Start /
Standby
= REC
SET UP section = [Recording] = [Video/Audio]
Note 1:
“LPCM” cannot be selected when “DV” is set as
the input.
Note 2:
Cannot be selected when “PAL” is selected as the
TV system.
Recording
Video Encode Rate Settings
The SET UP section
= [Recording] = [Video/
Audio]
= [Video Encode Rate] command allows
you to set the encoding rate for recording. This
setting affects the recording time and the transfer
rate (image quality). See pages 78 and 79 for
information on the relationship between encoding
rate and recording time/transfer rate.
The encode rate can be set either as a step between
step 1 to 32 or as a recording time value. The
recording time value is converted to the step that is
closest to the set time.
SET UP section
= [Recording] = [Video/Audio]
= [Video Encode Rate] Step change
SET UP section
= [Recording] = [Video/Audio]
= [Video Encode Rate] Time change