Uniden FP099 - Manual (Page 7)

5
TELEPHONE KEY FUNCTION
Ringer Select Switch
If you do not wish the phone’s ringer to interrupt you, move the Ringer Selector Switch
(located under the base) to OFF.
Regular dialling
Lift the handset and listen for dial tone. Then enter the telephone number you wish to
call. The dialled number will appear on the LCD screen whenever you make a call.
Redial function
To redial the previous number you called. Lift the handset and press the redial button.
Pause function
To insert a temporary pause. press the pause button during a dialling sequence. For
example, in some cases when dialling an international number you need to place a pause
between the clusters of numbers to allow the telephone company, relaying the call, time
to process it. The number 011-886-22-795-1234 would need to be dialled 011 (pause) 886
(pause) 22 (pause) 795 (pause) 12345.
Mute button
For privacy when you are required to consult with a person standing next to you and do
not wish the party on the line to hear your conversation, press and hold the mute button.
The call resumes on releasing the button.
Flash button - Call Waiting
If the call Waiting tone sounds while you are on a call -
New Zealand: Press the flash button to switch between callers.
Australia: Press flash then 2 to switch between callers.
For ‘Call Waiting’ to operate
you must subscribe to this
service through your local
telephone company.
If you do not have this
service, then pressing the
flashing button during a call
may disconnect the caller.
NOTE