Entering your area code – Uniden EXI 4246 User Manual
Page 16
B A S I C S E T U P [ 1 5 ]
w w w . u n i d e n . c o m
2) Press the
/vol/
key to select
CI D CW
.
3) Press the select key to toggle and turn on Caller ID on Call Waiting.
4) Press the end key and return the handset to the base unit to complete the setting. The
handset returns to standby mode.
Entering Your Area Code
If you can make a call by dialing only 7 digits (instead of 10), you can program your local area
code in your phone. If you get a call from within your area code, you'll only see the 7-digit
phone number. If you get a call from outside your area code, you'll see all 10 digits.
1) When the phone is in standby mode, press and hold the call id/
menu key. The following screen appears.
2) Press the
/vol/
key twice to select
A r ea Co de
.
3) Press the select key. If an area code was already stored, the
phone will display it.
4) Use the number keys (0 - 9) to enter the 3-digit area code. If you
make an error, use the delete/chan key to backspace.
5) Press the select key. A confirmation tone sounds.
6) Press the end key to complete the setting. The handset returns to standby mode.
BASI
C S
ETUP
UP078.book Page 15 Thursday, December 14, 2006 1:58 PM