Register the handset – Uniden DCT646 User Manual

Page 5

–

Make sure the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that
the handset makes good contact with the charger charging contacts.

• Use only the supplied AD-310 AC adapter. Do not use

any other AC adapter.

• Place the charger close to the AC outlet so that you can

unplug the AC adapter easily.

YOU NEED TO REGISTER THE DCX640 TO THE MAIN BASE BEFORE USE!

Before registering the handset,
the battery pack must be charged
for 15-20 hours.

Place the extra handset
in the main base unit to
begin registration. (Picture is the
DCT646 series main base.)

While the handset is registering,

H an d se t Re g is te r in g

will

appear in the LCD. When

R eg i st r at i on C o mp l et e

is displayed, the handset has
been registered to the base.
If

R eg is t ra t io n F ai l ed

appears, please try these
steps again.

• The handset can be registered when the main base is in

standby mode.

• Standby Mode - The handset is not in use and talk/flash

has not been pressed.

Using the DCX640 with the
Integrated Answering Device

If the original unit has a built-in answering system, you can check
your new messages, skip, repeat, or delete your messages with the
DCX640 handset. For more detailed instructions, see the owner’s
manual supplied with the original unit.

4 G I K U V T C V K Q P
% Q O R N G V G

* C P F U G V
4 G I K U V G T K P I

DCX640

Handset

DCX640

Handset

Charger

Main Base

DCX640 Handset

Main Base

Charge the handset
for 15-20 hours.

Place the DCX640
handset in the main
base to register.