Uniden DECT3181 - Manual (Page 19)

19
Change the volume
Speaker and earpiece
volume ringer volume
You can change the volume
of the speaker on the base
and each cordless handset
separately.
You can change the volume of
the earpiece on each handset;
this does not affect the
handset’s speaker volume.
Anytime you are listening to a
speaker or earpiece, press
uP
to increase the volume and
dOWn to decrease it.
-
-
-
You can change volume of the
ringer on the base and each
handset separately.
Each cordless handset uses the
same ringer volume for both the
land line and the cellular line.
When the phone is in standby,
press
uP to increase the volume
and dOWn to decrease it.
If you turn the ringer volume all
the way down, the ringer turns
off.
-
-
-
-
Call waiting
Call Waiting is a service available from your telephone provider that lets
you receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call. You might
have to subscribe to these services separately for your land line and your
cellular phones. Contact your telephone provider(s) for more information.
If you get a Call Waiting call, the phone sounds a tone and displays any
CID information received for the waiting call. To switch between the
current call and the waiting call, press
TaLk/fLash (if you’re on the land
line) or cELLLink (if you’re on a cellular line). Remember, each time you
switch, there is a short pause before you’re connected to the other caller.
Using Caller ID and Redial Lists
Caller ID (CID) is a service available from your telephone provider that
shows the phone number (and sometimes the caller’s name) of incoming
calls. You might have to subscribe to CID service separately for your land