Reset reset all, Resetting your base unit, Outside line pause (pabx) – Uniden DECT 1811 User Manual
Page 20: Advanced functions
16
RESETTING YOUR BASE UNIT
The base unit can be reset to default factory values. RESET ALL will desubscribe
all connected handsets and put the base unit into subscription mode. INITIALIZE
will reload default parameters which are:
Base unit ringer volume:
level #9
Base unit ringer melody:
melody #4
Dialling mode:
DTMF dialling
Flash time:
600ms New Zealand, 100ms Australia
Call barring:
all barred numbers and the assigned
handsets are cleared
Reset your base unit as follows:
• press
[menu]
key until you reach the
BASE SETTING
display on the LCD.
• press
[OK]
key to choose this menu item.
• press
[menu]
key until
BASE RESET
is
displayed on the LCD.
• press
[OK]
to choose this option.
•
FP PIN:
will be displayed.
• enter your 4 digit PIN number and press
[OK]
. (Factory default is 1590).
• press
[menu]
key to scroll between
RESET ALL
and
INITIALIZE
options.
• press
[OK]
when you have chosen your
preferred reset option.
• press talk
[
]
.
OUTSIDE LINE PAUSE (PABX)
The base can be programmed to insert a 3 second Pause after the first digit. This
is for accessing an outside line through a PABX.
• press
[menu]
key followed by
[*]
key and
PABX SETTING
will be displayed on the LCD.
• press
[OK]
key to choose this menu item.
•
PABX SET 1
will be displayed.
• press
[OK]
.
• key in the digit you wish to use to activate the Pause.
• press
[OK]
key.
• press talk
[
]
.
RESET
RESET ALL
ADVANCED FUNCTIONS