Busy channel lock-out (bcl), Monitor – Uniden UH075 User Manual

Page 21

➤ BUSY CHANNEL LOCK-OUT (BCL)

This feature prevents accidental transmission on a busy channel.

This is recommended on channels where CTCSS is being used. If the channel is
"active" and the signal is coming from a non or different CTCSS code user the
BCL feature will prevent you from transmitting.

To activate BCL

Press and hold

for 1.5 secs. until "BCL" appears on display.

To De-activate BCL

Press and hold

for 1.5 secs. until "BCL" disappears from the display.

➤ MONITOR

This feature enables users to listen in for weak signals on the current channel at
the press of a button.

To use monitor
• For brief listening, press

• For continuous listening. Press and hold

for 2 sec. A two tone beep

will be heard and the receiver circuit will stay open letting in both the noise
& weak signals.

• Display shows MON and BUSY icons.
• To return to normal receive mode press

mon

bcl

UT01913ZZ_1 11/21/03 5:50 PM Page 19